IR Webcam

Ok... it was pretty simple...



The first thing is to get this little screw by doing what they say here :

http://www.instructables.com/id/Making-a-Night-Vision-Webcam/

When you're done, all you need to do is to remove the small circle on the top (I used a knife).
There you go :



As you can see, this is the IR filter. Remove it with a tiny screwdriver (it is not glued) :



To block normal light, I used a small part of a floppy disk that I fixed on the other side :



The result, testing one of my LEDs :




That's all folks, have fun !